Industrial water chiller is composed of the following main parts:
Refrigeration compressor systems: There are many types, such as piston, centrifugal, screw, spiral, …
Chiller outdoor unit: When in operation, water will be pumped through the copper chiller outdoor unit to cool the gas.
Chiller evaporator: There are 3 types of chiller evaporators that are commonly used today are dry evaporator, submerged evaporator and PHE plate evaporator.
Control cabinet: Used to control the operation of the water chiller.
Industrial water chiller is used to control the mold temperature, helping to improve the quality of the finished product.

Contact: A. Trung – 0936.689.633

Industrial water chiller is used to control the mold temperature, helping to improve the quality of the finished product.
The machine has microprocessor controller and precise electronic thermostat for easy operation.
In addition, the machine is suitable for many different working environments, from plastic companies to construction, fresh concrete, electronic components manufacturing, plating, chemicals, other solutions, alcohol. , food, veterinary medicine, medicine, aquarium seafood, …
The machine has high durability, stable operation and long usage time. In particular, the installation of a water chiller is also quite simple.
Normally, each water chiller will have from 3 to 5 levels to reduce the load so that users can adjust the capacity accordingly, helping to save energy consumption during operation.
The machine makes finished products reduce heat faster, thereby shortening production time, improving labor productivity

CHILLER REFRIGERATOR FOR CHEMICALS (less effect on stainless steel) and the use of copper pipes will cause chemical process to material properties.

The process of using industrial water chiller

Step 1: Select the installation location of the machine
Because industrial water chiller has a large weight, you need to install it in a place with a flat, solid surface to be able to withstand the weight of the machine. Note, it is necessary to avoid a location with direct sunlight because it will affect the operation of the machine.

Step 2: Connect the tap water
Need to connect the machine to an external plumbing system to pump water into the air conditioner. In addition, you must also install other parts such as check valve, filter, vibration damping tube, thermometer, pressure gauge, …

Usually this will be done by the machine supplier. However, you also need to know the process to handle it when something goes wrong.

Step 3: Connect the electrical system to the machine
When connecting electrical systems for industrial water chiller, you should pay attention to comply with regulations and safety standards for electrical connection of electromechanical works to help the machine operate stably.

Step 4: Start the machine
Before starting the machine, you need to check the electrical system and water supply to see if it is on or not. In addition, pay attention to the water pump lock valve, electrical cabinet switch, engine pressure meter, … to see if it is safe.